I am having a problem with the tapi or tsp component. Somehow the system hangs and affects access to the main voicemail port. When this happens the Unity system doesn't answer and calls just ring and ring. However if you dial the other voiceports individually they answer.<br><br>To resolve this we have to stop unity, stop the activevoice services. Try and stop the telephony service which always fails, so we have to kill the process that was being used by the tapi services. Once we do this we can restart the telephony and the activevoice services. Then unity will start back successfully and answers when the user doesn't pick up.<br><br>Any ideas as to what is causing this. This is a windows 2k server running exchange 5.5 and active voice 2.4. <br><br>This is happening to us at least once a week.<br><br>
Im not sure what you mean by the main voice mail port? Do you mean you have a hunt group set up and the first port in the hunt group fails to answer but the other ports answer OK?
What voice boards/interface are you using? Dialogic?
One thing thats caused Dialgoics TAPI driver some problems in the past is having dialouts and incoming calls banging away on the same port. There were some timing issues that caused them fits and it would essentially never put the port back into service. If you have some ports set for dialout (i.e. analog lamps, TRAP connections, pager and message delivery dialouts), try to move those to the end of the hunt group (assuming its a first available hunt scheme) which will minimize the time outbound calls are being made on a port at the same time an inbound call is being answered.
That aside, if its the Dialogic TAPI driver is getting wedged, wed want you to turn on some diagnostics for their driver and get that information to us to pass on to their support team. Your best bet right now is to call our support folks and get that ball rolling.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...