Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

TapiLine Initialize failed

Everything was working fine. Shutdown CCM and Unity. Started CCM, then tried to start Unity, but Unity wouldn't start and showed the following errors in Event Viewer. <br><br>4/25/2002 9:15:35 PM AvMiu_MC Error (8) 517 N/A UNITY The description for Event ID ( 517 ) in Source ( AvMiu_MC ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: 0x00000209, CAvMiu::Initialize(), No lines could be initialized.<br><br>4/25/2002 9:15:34 PM AvMiu_MC Error (4) 507 N/A UNITY The description for Event ID ( 507 ) in Source ( AvMiu_MC ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Miu, No lines could be initialized.<br><br>4/25/2002 9:15:04 PM AvMiu_MC Error (8) 521 N/A UNITY The description for Event ID ( 521 ) in Source ( AvMiu_MC ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: 0x000001FA, 2, CAvMiuLine::LineInit(), Line Initialization failed, TapiLine Initialize failed.<br><br>4/25/2002 9:15:04 PM AvMiu_MC Error (8) 521 N/A UNITY "The description for Event ID ( 521 ) in Source ( AvMiu_MC ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: 0x000001FA, 2, CAvMiuTapiLine::Open(), TAPI lineOpen() failed with 0x80000048 (LINEERR_OPERATIONFAILED), <br> TAPI DeviceID: 1<br> Service Provider: SelsiusTSP.TSP."<br><br>4/25/2002 9:15:04 PM AvCiscoTsp_MC Error None 106 N/A UNITY The description for Event ID ( 106 ) in Source ( AvCiscoTsp_MC ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: 1, 192.168.4.241.<br><br>After this tried to restart Unity several times, same errors, and Unity will not start. Then once it got started, and no more errors. <br><br>Can anyone help me in this, as to why these errors and does this point to a problem with the Unity server?<br><br>Thanks,<br>Partha<br><br><br><br>

2 REPLIES
Anonymous
N/A

Re: TapiLine Initialize failed

You mentioned that you restarted both Unity and Call Manager.

If Call Manager hadn't completely come back up, and Unity was trying to register its ports, you might see this behavior.

Once Call Manager was ready for the device registrations, it looks like everything came up ok.

That stuff about "local computer may not have DLL files..." just means you are looking at the event log on a machine that doesn't have (same version of) Unity installed, so there is no way for the event viewer to look up the actual error text.

Scott Morgan
Cisco Systems TAC

Silver

Re: TapiLine Initialize failed

Thanks for your reply Scott!
The CCM was already started at 9:07PM, 8 mins before the last Unity restart failed( 9:15PM). The Unity restart which succeded was done at 9:43PM (about 36 mins) after CCM was started. Between 9:15PM-9:43PM no attempts to restart unity was made.
The reason you gave sounds good to me, I have one doubt though. Is it possible there is some problem with the CCM that it was not responding to the port registration request by Unity (i.e.,can the CCM be slowed down to the extent that it takes about 10 mins to come up completely), or there might have been some network problem stopping the requests on its way?

Thanks,
Partha

180
Views
0
Helpful
2
Replies
CreatePlease login to create content