Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telephony numbering plan type

is there any way to configure Telephony numbering plan type from Unknowns to National on router?

I am useing 3360 with PRI connected to Alcatel 4400.

best regards

==

|----0001 |Numbering Plan Id |ISDN/Telephony numbering Plan E.164 |

|-000---- |Type of Number |Unknown

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Telephony numbering plan type

You'll need the isdn map command of the serial interface:

e.g

interface serial1/0:15

isdn map address .* plan isdn type national

.* is a regular expression that matches all numbers - set the plan and type as appropriate.

Hope this helps,

Justin

1 REPLY
New Member

Re: Telephony numbering plan type

You'll need the isdn map command of the serial interface:

e.g

interface serial1/0:15

isdn map address .* plan isdn type national

.* is a regular expression that matches all numbers - set the plan and type as appropriate.

Hope this helps,

Justin

255
Views
0
Helpful
1
Replies
CreatePlease to create content