TFTP load balance

[silex]

we have ccm 4.2(1). 1 publisher and 1 subscriber, I have been asked to configure the subscriber to be the main tftp server and the publisher to be a secondary tftp server. Looking through the vast array of guides, i am unable to find any references. Is this possible and how?

[Brandon Buffin]

Yes this is possible. Take a look at the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cccb.html#wp1029884

You will also need to configure the secondary server using option 150 in your DHCP scope. You should have 1 entry now which points to your current TFTP server. Simply add a second entry. If the first TFTP server is down, the phone will look to the second.

Hope this helps. If so, please rate the post.

Brandon

[silex]

perfect, many thanks for your help