With ccm 4.1(3) and a remote gateway 2821 as srst I have this problem. When the srst is activated, all the phones are registered well with the srst router, but not the 7920. I can pinging from de router to the phone (the 7920get the IP address from the dhco router that is the same srst router), but IT doesn't register. The debug shows Oct 6 2005 12:29:42.897 GMT+1: New Skinny socket accepted  (30 active)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...