Re: The maxium number of IP phones on ICS7750

HYE WILSON · ‎09-22-2002

Does any know how many IP phones ICS-7750 support?

Thanks in advance.

HYW.

akocelj · ‎09-23-2002

Hello,

If you have 1 SPE (512 MB ram) up to 500 phones.

If you have 2 SPE (512 MB ram in each ) up to 1000 phones.

If you have 2 SPE (1 GB ram in each ) up to 2000 phones.

If you have 3 SPE (512 MB ram in each ) up to 2000 phones.

If you have 3 SPE (1 GB MB ram in each ) up to 3000 phones.

Best regards,

Aleksander Kocelj

HYE WILSON · ‎09-23-2002

Thanks for the info.

Do you happen to know what the maxium device weight of MCS-7815-100 and ICS-7750 is? I am having a trouble locating this information on the Cisco's web site.

HYW.

akocelj · ‎09-23-2002

Read this article.

By my knowlage it should be capable to server 500 IP phones in default configuration.

http://www.cisco.com/warp/public/cc/pd/mxsv/mxcvsr/prodlit/s7815_ds.htm

Best regards,

Aleksander Kocelj

rickb · ‎09-23-2002

Be careful with the 7815, it is limited to 200 phones in the software. It also does not cluster the same way, it is not a normal CallManager image.

Rick

anilaravind · ‎09-24-2002

i suppose its ICs7750 Supports 200 Ip phones

Rgds,

Anil Aravind

akocelj · ‎09-26-2002

Hello

As I mentioned before the number of IP phones supported by ICS 7750 it depents on: how many SPEs do you have, how much RAM per SPE do you have,...

Best regards,

Aleksander Kocelj

HYE WILSON · ‎09-27-2002

Thanks, I was told by Cisco that it is 500.