Three Way voicepath problem in CISCO 2600 series for H323
We are using CISCO IOS release 12.0/12.1 as well as the CISCO 2600 series routers as GWs and GKs.When I am trying a three way voicepath among the MGCP subscriber and two H323 subscribers residing on two different GWs then voicepath is not happening.I am not able to use the debug commands too on GW as well as GK to see whether the logical connection is being established or not.We are using BTS10200 CA.Plz help me with this
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...