Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Time on servers

The time on our servers. CCM and Unity are one hour off. but the phones have the correct time. if I set the ccm sever to the correct time the phones go an hour ahead. If I set the Unity servrs to the correct time they stop answering calls.


Re: Time on servers

Double-click the time in the system tray. Go to the Time Zone tab. Make sure that "Automatically adjust clock for daylight saving changes" is checked.


Cisco Employee

Re: Time on servers

I don't have anything for you on the ccm side of things but I do have the field notice for the DST and Unity here.

Make sure your Unity was patched correctly in the first place the first time this DST was an issue. If not, patch it and test. If this isn't the issue then we can go from there.



Re: Time on servers

This is correct. If your server time on the clock still says "Standard" you do not have the Windows patch installed. It should say (example) Easter Daylight.

The two patches mention in the field notice are what you need. They are actually in the Cisco DST download in a sub folder. Download, and run. You will not need to reboot your computer on the windows patches

CreatePlease login to create content