Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Timeout busy seconds on call manager server

Hi all,

when we call a busy number from an IP Phone we correctly hear the busy tone, and, if we don't press the End Call button, the call is ended after 30 seconds. Do you know if it's possible to reduce this timer?

I see on CCO that this is possible for CCME (timeouts busy seconds), but I find nothing for call manager "server" (we have 4.1(3)).

Thanks for your help.

Best Regards

Roberto

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Timeout busy seconds on call manager server

Roberto,

This is set in CCM Service Parameters, CallManager service, T305 Timer. I have tested this in a lab as low as 6 seconds. I have never used this change in a production standpoint and would recommend thorough testing.

T305 Timer : This parameter specifies an ISDN Layer 3 timer for User (Disconnect Request) DISCONNECT sent, Network (Disconnect Indication) DISCONNECT without progress indicator sent. For exact timer definitions, refer to the Q.931 specification.

This is a required field.

Default: 30000.

Unit: msec.

Minimum: 6000.

Maximum: 150000.

Please rate any helpful posts

Thanks

Fred

1 REPLY

Re: Timeout busy seconds on call manager server

Roberto,

This is set in CCM Service Parameters, CallManager service, T305 Timer. I have tested this in a lab as low as 6 seconds. I have never used this change in a production standpoint and would recommend thorough testing.

T305 Timer : This parameter specifies an ISDN Layer 3 timer for User (Disconnect Request) DISCONNECT sent, Network (Disconnect Indication) DISCONNECT without progress indicator sent. For exact timer definitions, refer to the Q.931 specification.

This is a required field.

Default: 30000.

Unit: msec.

Minimum: 6000.

Maximum: 150000.

Please rate any helpful posts

Thanks

Fred

295
Views
0
Helpful
1
Replies