Does anyone know of a way to setup Toll restriction by time of day. I want some phone to be able to dial local and long distance during 8-5, but after 5 only by able to dial local call. Also I need to setup local and long distance dial between 8-5, but no call after 5pm.
This sort of setup can be configured using a Cisco Unity 3.0 or 4.0. With this, you can configure Restriction Tables, with different dial patterns which you need to restrict for long distance or local or you want to allow for long distances. All this can be configured in the Restriction Tables. To learn its configuration and its administration please refer to:
So how did you do this? Did you make all outbound calls on the Call Manager go through Unity before getting to the gateway of choice? If so, I am interested in how that works and its ramifications on the voice-port usage. Thanks in advance.
Restriction tables are used in messaging only. The links provided above give examples. The type of toll restrictions as the original question posed are not possible through Unity 3 or 4.
Restriction tables are for the following:
-Recording and playback by phone from Cisco Unity applications when the phone is the designated recording and playback device in the Media Master, or in the VCR-style player/recorder available in Lotus Notes with IBM Lotus Domino Unified Communications Services (DUCS) for Cisco Unity. (The Media Master is available in the Cisco Unity Administrator and the Cisco Unity Assistant.)
-Delivering faxes to a fax machine.
-Sending message notifications.
There are, most likely, third-party apps that can accomplish the task.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...