Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Transcoder problem

I have several strange messages on router's log-

1)ASSERTION FAILED: file ../voip/dsmp/dsmp_xcode.c, line 144

ASSERTION FAILED: file ../voip/dsmp/dsmp_xcode.c, line 146

ASSERTION FAILED: file ../voip/dsmp/dsmp_xcode.c, line 148

ASSERTION FAILED: file ../voip/dsmp/dsmp_xcode.c, line 146

2)After reload i saw it-

*Sep 7 13:20:29.871: %DSPRM-5-UPDOWN: DSP 12 in slot 1, changed state to up

**Sep 7 13:20:31.159: %DSPRM-5-UPDOWN: DSP 11 in slot 1, changed state to up

*Sep 7 13:20:31.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

*Sep 7 13:20:32.447: %DSPRM-5-UPDOWN: DSP 10 in slot 1, changed state to up

*Sep 7 13:20:33.735: %DSPRM-5-UPDOWN: DSP 9 in slot 1, changed state to up

*Sep 7 13:20:35.023: %DSPRM-5-UPDOWN: DSP 8 in slot 1, changed state to up

*Sep 7 13:20:36.311: %DSPRM-5-UPDOWN: DSP 7 in slot 1, changed state to up

*Sep 7 13:20:37.599: %DSPRM-5-UPDOWN: DSP 6 in slot 1, changed state to up

*Sep 7 13:20:38.887: %DSPRM-5-UPDOWN: DSP 5 in slot 1, changed state to up

*Sep 7 13:20:40.175: %DSPRM-5-UPDOWN: DSP 4 in slot 1, changed state to up

*Sep 7 13:20:41.463: %DSPRM-5-UPDOWN: DSP 3 in slot 1, changed state to up

*Sep 7 13:20:42.751: %DSPRM-5-UPDOWN: DSP 2 in slot 1, changed state to up

*Sep 7 13:20:44.039: %DSPRM-5-UPDOWN: DSP 1 in slot 1, changed state to up

but i have 3 PVDM cards-

PVDM Slot 0:

64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Product (FRU) Number : PVDM2-64

PVDM Slot 1:

64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Product (FRU) Number : PVDM2-64

PVDM Slot 2:

64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Product (FRU) Number : PVDM2-64

How to understand it?

1 REPLY
Green

Re: Transcoder problem

Check this:

CSCsa66361 - ASSERTION FAILED: dsmp_xcode.c, line 146 and 148

Bug Details.

Symptom:

Assert fails seen in dsmp_xcode.c

Conditions:

When testing Hold/Resume call using SCCP transcoding service

Workaround:

none. Note. this does not impact the call.

This bug is fixed in 12.4(2)T 012.004(2) and above.

910
Views
0
Helpful
1
Replies
CreatePlease to create content