Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

agr
New Member

Transfer does not work from pstn calls

Hello,

we have a problem with incoming calls from the pstn to cisco ip phones 7960 and 7940. Transfer from internal calls work fine but the transfer of a call from the pstn to an ip phone, to another ip phone does not work.

Any Ideas ??

Thanks in advance

Andi Gruber

3 REPLIES
Bronze

Re: Transfer does not work from pstn calls

Hi,

check your codec configuration on the voip dial-peer. The default MOH Codec is "u-law" on the Call Manager MOH Server.

Regards

mehmet

New Member

Re: Transfer does not work from pstn calls

If the Gateway is H323 then ensure that you have an "H323-gateway voip bind scraddr x.x.x.x" command on one of the interfaces(or loopback)

New Member

Re: Transfer does not work from pstn calls

We had a problem similar to this where the PSTN transfered called was getting ringback on transfer and would get disconnected sometimes.

We were running 3.1.3a , TAC provided a patch to remedy the problem.

132
Views
0
Helpful
3
Replies