We would like the following works:
FXO -> ephone-dn xxxx (transfer) -> FXO
ephone-dn yyyy (call) -> ephone-dn xxxx (transfer) -> FXO
The following is written:
ephone-dn 16 dual-line
number yyyy
name Other
ephone-dn 17 dual-line
number хххх
name Other
ephone-dn 18 dual-line
number 2011
name Dmitry
ephone-dn 19 dual-line
number 2012
name Office
call-forward all 9x
ephone 2
mac-address 0016.7FA2.EEF5
type 7940
button 1:18
ephone 3
mac-address 0016.BDA2.AA34
type 7940
button 1:17
ephone 4
mac-address 0234.B567.A544
type 7940
button 1:16
where, x – city number, 9 - prefix of access to city telephone line so ideally it results FXO -> ephone-dn xxxx (transfer) -> ephone-dn (cfwdall) -> FXO
in configuration that I formulated the number 2012 works perfectly with the following cfwdall to FXO (ephone-dn ххxx (call) -> ephone-dn 19 (cfwdall) -> FXO) but that’s it … transfer does not work by any of the chains.
1. FXO -> ephone-dn 18 (transfer) -> ephone-dn 19 (cfwdall) -> FXO
2. ephone-dn xxxx (call) -> ephone-dn yyyy (transfer) -> ephone-dn 19 (cfwdall) -> FXO
The phone (7940) considers that there is one more outgoing call but not transfer.
How it can be realized otherwise? Or what should be done in order it works?
Thanks
P.S.
!
fxo hook-flash
transfer-system local-consult
transfer-pattern .T
!
CME3.2 ios 12.3(11)T3
