when more than one call comes in the receptionist has to park all but one, then transfer the first and go back through the rest. she can not tranfer a call if it is not the first...the button is not available on the soft buttons on the 7960
We are having the exact same issue. We are running CallManager 3.08 and load P003v301 on the 7960s. The 7960s are configured for 5 line appearances. Any info from the engineers on this? This is becoming a major issue for the operators. Thanks.
You need a free open line to transfer a call. If you only have two or three lines on your IP Phone and they all have active calls. You need to free up a line to perform the transfer; parking a call would free a line for this.
We ran into this a few months ago with a two line configuration, and had to move to a default 3 line configuration.
I think if Call Waiting is enable on the line then that would also work as a work around. We had so many issues with Call Waiting that we had to disable it system wide.
I agree, I disabled call waiting and added lines to the phone a day or so ago and that let her do whatever to any call. With call waiting on and a second call on a single line you can only park the call.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.