Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Transferring Calls

When someone dials my extension and presses the 1 key during my greeting, I want that call to be transferred to a different extension and ring the phone at that ext. When pressing the 1 key, the call gets transferred to the other extension's greeting and doesn't ring the phone. How can I get the call to transfer and ring the phone.<br>In Caller Input, I have the 1 key set for Attempt to transfer to subscriber. <br><br>

2 REPLIES
Anonymous
N/A

Re: Transferring Calls

if you have "attempt transfer" set for the one key rule (which it sounds like you do) the next most likely issue is you don't have a transfer rule setup on the call handler you're sending the call to. Try setting the "alternate" trasnfer rule to active and set the number you want to ring there (and set it for release or supervised etc...). Then try a test call again. Using the alternate transfer rule will over ride the other transfer rules and ignore the time of day so you're sure you're working with the right one.

If THAT doesn't work, there's something else going on that will need a new approach.


Jeff Lindborg
Unity Product Architect/Answer Monkey
Cisco Systems
lindborg@cisco.com
http://www.AnswerMonkey.net (new page for Unity support tools and scripts)

Gold

Re: Transferring Calls

Check out this URL on CCO:

http://www.cisco.com/warp/public/788/AVVID/default_sub_temp.html

Keith

Keith Chambers
Unity Technical Lead
Unified Voice Team, San Jose
Cisco Systems
kechambe@cisco.com

83
Views
0
Helpful
2
Replies
CreatePlease to create content