cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1661
Views
0
Helpful
1
Replies

Translate outgoing calling #, CME, FXO, to PSTN

kbehymerisg
Level 1
Level 1

We have a CME with 8 FXO lines going into it. 3 lines are for incoming calls and 5 lines are for outgoing calls.

I want the people we call from the outgoing lines to display one of our incoming lines number. We want this so if they hit redial they call into our "incoming" number and not one of our outgoing lines.

Is it possible to translate outgoing calling numbers from the CME via FXO to PSTN? Is it possible that the telco is providing the caller-id and ignoring what digits that I send over the FXO line?

I tried the following with no luck:

voice translation-rule 1

rule 1 /.*/ /15551231234/

voice translation-profile profile1

translate calling 1

dial-peer voice 1 pots

translation-profile outgoing profile1

destination-pattern 1..........

port 0/1/0

forward-digits all

Thanks

1 Reply 1

brian-henry
Level 4
Level 4

Try this on your gateway

dial-peer voice 1 voip

translation-profile incoming Phone1

answer-address (UserDN, like 7...)

voice translation-profile Phone1

translate called 1

voice translation-rule 1

rule 1 /^1(or whatever it begins with)/ /19XXXXX/

You can also test out any translation rule by using

test voice translation-rule 1 (Your number your trying to dial)

HTH

Brian

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: