Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Translation Pattern on CallManager

Hi all,

I've to build a Translation Pattern able to modify the called number depending on the calling number.

Ex:

1xxx calls 9999 and 9999 will be changed into 9997

2xxx calls 9999 and 9999 will be changed into 9998

Is it possible and how ?

Best regards,

Christian

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Translation Pattern on CallManager

Hi,

You can create 2 partitions and put one Translation pattern in the first, the other TP in the second partition.

1XXX should have a calling search space with access to the first partition

2XXX should have a calling search space with access to the second partition

Make sure that 1XXX doesn't have access to the second partition and vice versa.

Good luck,

Matt

1 REPLY
New Member

Re: Translation Pattern on CallManager

Hi,

You can create 2 partitions and put one Translation pattern in the first, the other TP in the second partition.

1XXX should have a calling search space with access to the first partition

2XXX should have a calling search space with access to the second partition

Make sure that 1XXX doesn't have access to the second partition and vice versa.

Good luck,

Matt

87
Views
0
Helpful
1
Replies
CreatePlease to create content