Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

translation problem with country code

I am having a problem with the following configuration when dialing the international number 01181335401212. In this case, the customer dials an 8 to access an outside line. When the customer make a call (this is in SRST mode where CM is not involved), the digits being passed to the PSTN are only 13354011212. I have verified that the correct number is being dialed from the phone but the "8" that is part of the country code is being stripped. It almost seems to me like the number is being processed twice; first by the international dial peer then the long distance dial peer. Is this possible? Any ideas as to what might be going on here?

voice translation-rule 1

rule 1 // /1\1/

!

voice translation-rule 3

rule 1 // // plan any isdn

!

voice translation-rule 4

rule 1 /\(.*\)/ /9045551212/

!

voice translation-rule 5

rule 1 /^8\(.*\)/ /904\1/ type any national

!

voice translation-rule 6

rule 1 /^81\(.*\)/ /1\1/ type any national

!

voice translation-rule 7

rule 1 /^8011\(.*\)/ /\1/ type any international

!

!

voice translation-profile INTL-011

translate called 7

!

voice translation-profile LD

translate called 6

!

voice translation-profile Local

translate called 5

!

voice translation-profile inbound-Voice

translate called 1

!

voice translation-profile outbound-911

translate calling 4

!

!

dial-peer voice 100 pots

translation-profile incoming inbound-Voice

translation-profile outgoing INTL-011

preference 1

incoming called-number .

destination-pattern 8011T

progress_ind setup enable 3

progress_ind alert enable 8

progress_ind connect enable 1

direct-inward-dial

port 0/0:23

!

dial-peer voice 9 pots

translation-profile incoming inbound-Voice

translation-profile outgoing Local

preference 1

incoming called-number .

destination-pattern 8[23456789]......

progress_ind alert enable 8

progress_ind progress enable 8

direct-inward-dial

port 0/0:23

forward-digits 10

!

dial-peer voice 10 pots

translation-profile incoming inbound-Voice

translation-profile outgoing LD

preference 1

incoming called-number .

destination-pattern 81..........

progress_ind setup enable 3

progress_ind alert enable 8

progress_ind connect enable 1

direct-inward-dial

port 0/0:23

!

dial-peer voice 3000 voip

preference 2

incoming called-number .

destination-pattern 1....

session target ipv4:10.1.3.1

dtmf-relay h245-alphanumeric

no vad

118
Views
0
Helpful
0
Replies