Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

translation rule help

All -

I'm really struggling with one particular translation rule; in particular:

translation-rule 10

rule 1 /(..........\)/ /1\1#/

The goal is that when the system is presented with 10 digits, it will pre-prend a 1 (force long distance) and append the # to complete the call.

The # is required to end the digit string on two of my dial peers. If I don't include the # the system will continue to wait for more digits for a long, long time.

I'm concerned that the system isn't adding the #, but simply interpreting it as a wildcard...

Any suggestions?

2 REPLIES
New Member

Re: translation rule help

Can't help you too much with the translation rule but if you want to reduce the time it waits, reduce the inter-digit timeout, which defaults to 15 seconds in CCM. I reduced mine to 5 seconds and users haven't complained - at least that way you can avoid having to worry about the #

New Member

Re: translation rule help

Thanks for the response.

In this case it's not a matter of the interdigit timeout. I have a CME system that has a pair of FXO ports tied to a GlobalStar sat phone (GSP-2900). The sat phone expects a trailing # to be sent at the end of the dialed digit string.

Because we have other FXO ports on the system that do not require this - and I want the user experience to be consistent regardless of which port is available... I need to translate the digits only when they are going outbound on the two sat phone ports.

Maybe that will help others understand the quandry.

121
Views
0
Helpful
2
Replies