Was wondering if there was a max traslation-rule if router can accept?For example, I have a 2801 which is max out after only 253 translation-rules.At fisrt, I though that was a memory issue, I added more memory,but but that did not solve the issue.
What is more suprising is I added the same config with a few more translation-tule, let say 300 translation, on a 3825 series router with a new IOS. I still got the same issue, no more translation-rule is accepted after the first 253 translation-rules.
a Voice Translation Rule can have upto 10 ruls underneath it. You need to add multiple rule's under your voice translation rule then 1. Also if you have that many trans profiles I assume you not utilizing the masking features right, I've never used like more then 5-6 and I do tons of trans's
Use the voice translation-rule command to create the definition of a translation rule. Each definition includes up to 15 rules that include SED-like expressions for processing the call translation. A maximum of 128 translation rules are supported.
These translation rules are grouped into profiles that are referenced by trunk groups, dial peers, source IP groups, voice ports, and interfaces.
The following example initiates translation rule 150, Which includes two rules:
Thanks for your answer; however, I have 310 translation-rule with each of them has 10 rules underneath,so I have a total of 3100 rules in this 2801!
I was thinking a redesign with voice translation-rule.The problem is we can only have up to 128 voice translation with 15 rules underneath...!
I also though changing the 2801 for 3825 with a newer IOS would resolve the issue, but I was mistaken. Two days ago, I made a test with 3825 and still having the same issue, not able to add more translation-rule.
Yesterday, I received an email from one of the TAC engineer.He le me know that the issue is not the hardware it is the IOS.What bring me to ask now what version of IOS that support up to 500 translation-rule?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...