tring to get caller id to show 2 external phone numbers
We have 2 voip systems one building is giving me troubles. I am tring to get one group of extensions to show one phone number 527-6400 and another group of extensions to show 527-6401 when they call outside numbers. The voip system kinda got dumped on me i have been using the gui to make adjustments to the system. any help would be great a sample of the code for the cli would be great.
Re: tring to get caller id to show 2 external phone numbers
You may put two sets of CSS for each building (under phone's line or device itself). Each CSS may match a separate route pattern when they call out. This can be achieved by using partitions. For example if they call a local 10 digit dialing, your pattern may look like 9.[2-9]XX[2-9]XXXXXX. Create two such patterns one in partition P1 and another in partition p2. Include p1 in the CSS of building 1 phones and include p2 in the CSS of building 2 phones.
Use a different ext ph mask in either route patterns (527-6400 in one and 5276401 in the other).
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.