Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Trunk groups on h323 gateway

Does this effectively alleviate the requirement to have multiple pots dial peers - one to reference each voice port? Thanks!

voice-port 1/0/0

trunk-group OUTBOUND

!

voice-port 1/0/1

trunk-group OUTBOUND

!

voice-port 1/1/0

trunk-group OUTBOUND

!

voice-port 1/1/1

trunk-group OUTBOUND

!

!

dial-peer voice 1 pots

trunkgroup OUTBOUND

preference 1

incoming called-number .

destination-pattern 9T

3 REPLIES
Silver

Re: Trunk groups on h323 gateway

Silver

Re: Trunk groups on h323 gateway

I believe your config shuld be:

dial-peer voice 1 pots

trunk-group-label target OUTBOUND

preference 1

incoming called-number .

destination-pattern 9T

Silver

Re: Trunk groups on h323 gateway

I found this to be working as desired, and sending calls out correctly:

trunk group test

max-calls voice 2

description FXO trunk group

hunt-scheme longest-idle

voice-port 1/0/0

trunk-group test 1

voice-port 1/0/1

trunk-group test 2

dial-peer voice 121212 pots

destination-pattern T

trunkgroup test

191
Views
0
Helpful
3
Replies
CreatePlease to create content