Trunk turn up

[bahman.tajkarimi]

Hello Folks,

Everytime I try to turn up a trunk either PRI or T1, I fail. After spending hours for troubleshooing, I usualy endup openning a case with Cisco TAC and have their help. I was never able to do it alone. I am tired of it and need you help to learn how to do it. Could you please advise?

What is the best document for turnning up ane troubleshooting a PRI and T1 trunk

Thanks,

[tominatornz]

Try this link

http://www.cisco.com/en/US/customer/tech/tk713/tk628/technologies_tech_note09186a00801509d7.shtml

It takes you through the possible faults that may occur at different layers, different alarm types etc...

At the bottom of this document are some other useful links

[bahman.tajkarimi]

Thanks for the reply. I forgot to mention that the hardest part for me is the T1 CAS trunk turn up. Could you please send me a document for T1 CAS also? Your help is greatly appreciated.

Thanks,

[tbramwe]

Try this one for T1 CAS

http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_troubleshooting_procedures09186a00801040bc.shtml