I am in the process of selecting a cisco product to provide data and voice communication between Home office in USA and Home office in India. I am about to use ISDN connectivity on either ends and implement VoIP to cut telephone bill cost. Which cisco product will suit the best to my needs on USA end.
The uBR924 has FXS, so you would connect a standard analog phone.
The other leg of the call is VoIP. So everything that you call from this phone will travel over VoIP. If you want to call numbers off the VoIP network, like numbers on the PSTN, then you need a VoIP gateway that connects to the IP network and to the PSTN, with the appropriate type of voice interface(s) like ISDN, T1/E1, FXO, etc.
Now I am searching for a service provider who avails the VoIP gateway service only. Is there any service provider who avails VoIP gateway service only so that I can subscribe for the service. If not, what do I need to do to create the voice gateway infrastructure on my own. Since this is for a SOHO, cost effective method is preferred.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.