Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Super Bronze

UKNP Problem ???

Hi All

I'm trying to get the downloadable UKNP described at this url to work:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008028af3a.shtml#intro

I've configured some route filters as described in the examples in the url above, and tested them using the Dialled Number Analyzer, and all looks well...

The problem I have is that when I use this, and forward the call to a remote system via H323, no digits are forwarded - I receive dial-tone from the remote system.

If I use 9.! to match the number (instead of 9.@ which activates the number plan) it works OK!

Is there a step I'm missing here?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Silver

Re: UKNP Problem ???

Under the POTS dial-peer, enter the command "forward-digits all".

Super Bronze

Re: UKNP Problem ???

There aren't any dial-peers - it's a H323 integration from CallManager to an Avaya added as a H323 gateway.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
194
Views
0
Helpful
2
Replies
CreatePlease to create content