cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
307
Views
0
Helpful
3
Replies

Unable to make dialup connection (data) through VG248

hiteshoberai
Level 1
Level 1

I am having a remote user trying to make a dial up connection ( data )via analog line terminated on a VG248 device but he is unable to make the connection the same user when he trs to make a analog voice call via VG248 he is able to make the voice call

Request you to pls let me know what could be the problem & if some one had faced such situation & had a workaround pls let me know

Regards

Hitesh

3 Replies 3

thomas.chen
Level 6
Level 6

These violations is definitely something we'll need to address as they certainly will contribute to the failing modem calls.

E1 Error Events Troubleshooting:

http://www.cisco.com/en/US/partner/tech/tk713/tk628/technologies_tech_note09186a00800f99bb.shtml#linecode

Configure Fax Pass-Through with the Cisco VG248 :

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_example09186a008020160d.shtml

The above URL should help you to troubleshoot.

jdcutcher
Level 1
Level 1

I've had problems with this myself.

What is the VG248's uplink to the network?

Is that port configured with any QOS settings? You must remember that VG248 is not marking layer 2.

Is your gateway using fax-passthrough or fax-relay?

Also, there are some settings on the VG port you should turn off for optimization. For instance, turn off CWI, and extra things like this.

dandric
Level 1
Level 1

We had the problem with faxes

It seems data ethernet PATH between gateway (AS5350 in our case) and VG248 must be fixed in link speed (no auto negotiation) ->

speed 100

duplex full

It seems those packets made problems sometimes.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: