I have a situation where a CCM Cluster is providing MOH. I have a multicast stream of the MOH travelling over the WAN. I would like to know if I can have a Unicast stream over the WAN and the end Router convert it to Multicast and play it to the users?
I have browsed the internet and Cisco Site but could not find information.
Thanks for the help. My CCM version is 4.(3) and this has the option of sending unicast or multicast sereams I have SRST on the reomte router. This document explains the different types combination of Unicasts and Multicasts.
My curiosity still remains if a Unicast stream can be converted to a Multicast stream at the remote location? Is this configuration possible in a router?
I dont know if there is any easy way to convert unicast to multicast on a Cisco router. It's more a routing / switching question.
The only reason I could see why you wouldnt want to use the MOH from the branch router, is that you have a lot of sites, and you change the MOH frequently. Or you want to play lots of different MOH to different groups of phones.
In this case.. why cant you use Multicast over the WAN? Maybe you can tunnel the multicast?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...