Unity 2.4.6 - DB Walker error. Nearly every subscriber has this error. I didn't know you could disable the standard greeting. Not one subscriber has the standard greeting disabled but it is barking about it.
(error) Standard greeting rule for this handler is marked disabled which is an illegal configuration
You're going to need to get into DOHPropTest to fix this. Today's password is 9233. In the left window click CallHandlers. In the middle window find the callhandler associated with the problem subscriber. In the right window click on AVP_MESSAGING_RULES. When the new window pops up, select Standard on the left. In the main window click AVP_TIME_EXPIRES. Delete the value and click set.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...