Unity 3.0(2) is now available on CCO

[Anil Verma]

Cisco Unity 3.0(2) is now available on CCO.<br><A HREF="http://www.cisco.com/cgi-bin/tablebuild.pl/unity" target="_new">http://www.cisco.com/cgi-bin/tablebuild.pl/unity</A><br><br>You can either download a small patch file, which is applied to a 3.0(1) CD set. Or you can download the full CD images of 3.0(2) - these are very large files. The release notes explain how to do either.<br><A HREF="http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/rel_note/cu302_rn.htm" target="_new">http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/rel_note/cu302_rn.htm</A><br><br>Remember that an upgrade code is required when upgrading to Unity 3.0 and is obtained either by purchasing a software upgrade license or via the PUT tool, if you have a valid support contract.<br><br>We have also posted G729a prompt sets for all languages supported in Unity 3.0.<br><br>Anil Verma<br>Cisco Systems<br>anilve@cisco.com

[#2]

Can the patch from 3.0(1) to 3.0(2) be applied to a multi language environment, i.e. French in our case

[#3]

Yes the patch can be applied in a multi lingual environment.

Jami Stewart
Cisco Systems