After installing a new PDC with Win2K, SQL2K, Exch2K in a stand alone environment I try to install Unity 3.1.3. After all the questions from the setup (demo licenses, no voice card, Cisco PBX), it starts copying the files to commserver. After copying some files, the status window changes to "Event Notifications" and setup terminates. I don't get the question if I want to reboot or not.<br>When trying to use Configuration setup, I get the error "Error while initializing resource loader".<br>Reboot does not solve the problem<br>Anything I missed?<br>Thanks,<br>Willem<br><br>
This sounds like CSCdw73149 which is fixed in 3.1(4). Do you agree?
Symptoms: Cisco Unity Setup Part 1 disappears as it is copying files. In other words, after the installer follows the system prompts, the Setup window indicates that files are being copied files to the Cisco Unity server when suddenly the program stopsthe Setup window disappears and the installer is returned to the Desktop as if Setup had never started.
Conditions: A fresh install of Unity 3.1.2. May be other conditions such as upgrading to 3.1.2. And may exist in 3.1.1.
Workaround: 1. Copy the Setup image (i.e. copy images of the installation Cisco Unity CDs that you need to install Cisco Unity) to a directory on a network or local drive that you can access on the Cisco Unity server. 2. From the Setup image directory that you created in Step 1, find the AvTrapSvr.dll file, and move it to the Desktop. 3. Rerun Setup Part I from the Setup image directory that you created in Step 1. 4. When Setup Part I is complete, move AvTrapSvr.dll from the Desktop to the \CommServer\Components directory on the Cisco Unity server. 5. From the \CommServer\Components directory, run Regsvr32.exe on AvTrapSvr.dll. 6. Restart the Cisco Unity server.
Keith Chambers Unity Technical Lead Unified Voice Team, San Jose Cisco Systems
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.