i have one call manager serving two unity systems for testing purposes. on the one unity box, all works, except that whenever anyone rings unity it takes 15s before the voice mail starts. NOT 15s to go through to unity, unity answers the call immediately; but waits 15s AFTER answering before doing unity voicemail stuff! this is the same if it's a subscriber or outside caller leaving a message, or a subscriber collecting their own voice mails. i HAVE changed the 15s timeout on callmanager to 5s to be sure, but no change (the other unity works perfectly).
Sounds like the incorrect switch file is selected on Unity. If you go to the SA switch page, ensure that the system is set up to use the Call Manager integration with TAPI. Any changes here will require a restart of Unity (not necessarily the server, just Unity).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...