We have got PDC NT4.0 and Exchange 5.5 Unity 3.1X. If we upgrade the NT40 PDC to win2k-AD and install ADC for Exchange would that upgrade break Unity. Is there anything we need to do after the upgrade for Unity. No mailbox movement or anything to the hardware is taking place. There is no EX2k upgrade...Later on if there is EX2k upgrade what we need to do on the Unity side...<br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Aplication Engineer<br>714 4846275<br>
As long as the ADC connection agreement is a one way going FROM the Unity Exchange 55 system TO AD you are ok. If you setup a two way connection agreement you'll cause all kinds of grief and wax your Unity install completely.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...