Unity 4.0.2 cannot see certain accounts after reinstalling
I installed Unity 4.0.2 and uninstalled it since I was not happy with my first install. I removed everything according to the removal tool instructions. After reinstalling, I cannot see the users I imported in the previous install. I can create new users and add users that were not in the old install.
Re: Unity 4.0.2 cannot see certain accounts after reinstalling
I'm not sure what you mean by I cannot see the users I imported in the previous install. If you mean that these users don't show up in the SA as subscribers then that is to be expected, they will need to be re-imported.
But I'm guessing you mean that these previous users are not available to be re-imported. If that is the case try using the Remove Subscriber Properties tool (available here: http://www.ciscounitytools.com/App_BunnyKiller.htm) or look at the Importing Users from Active Directory portion of the help file for the Global Subscriber Manager. The GSM has the ability to remove the subscriber properties built in to it.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...