Unity 4.2(1) Forwarding a saved voicemail to another subscriber issue
I've got a new installation of Unity 4.2(1) The front desk is receiving voicemails and they want to forward them to another subscriber using the extension and not lastname/firstname. They listen to the message, press 5, ##, put in the extension and then Unity tells them the private list is empty. It works on my Unity 4.04 system but not theirs. I don't want it to search each individual private list but the same global list as the directory handler.
Re: Unity 4.2(1) Forwarding a saved voicemail to another subscri
Try this on your 4.2 system, instead of entering ##, enter 00 (zero zero). That works on my system and switches from spell by name to extension. I just tested and the ## does not work on my system's Directory Handler either, while the 00 works just fine.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...