Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

unity and exchange 2k, how to reconnect unity to a DR Exchange server.

Unity 3.1.3 connected to Exchange 2k message store, exchange crashed, customer reinstalled the exchange 2k box, now need to reconnect unity to the new exchange 2k box. Does any one have a good starting point, I dont want to reinstall unity if not necessary.

1 REPLY
Cisco Employee

Re: unity and exchange 2k, how to reconnect unity to a DR Exchan

At 3.1.5 and up this is a snap. If at 3.1.3, there's going to be some manual steps you'll have to do. Start with running \Commserver\ConfigurationSetup\Setup.exe

From there, you should be able to point to the new Exchange server.

After that, you'll have to manually edit some of the registry settings to correctly point to the new server. Those settings can be found here...

http://www.cisco.com/warp/customer/788/AVVID/mailstore-no-start.html

104
Views
0
Helpful
1
Replies
CreatePlease to create content