Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity configuration

Hi All,

We have a running setup on Cisco Call Manager Express along with Unity module plugged into same router.

Now,the customer has purchased separate MCS hardware for Pub & Subscriber.CCM would be implemented on CCM while Unity configuration will remain on earlier CME router.

I had a concern what all we need to configure on CCM so that Unity module on router can be integrated with CCM.

regs,

aman

2 REPLIES
Hall of Fame Super Red

Re: Unity configuration

Hi Aman,

One main thing you will need is a new license to work with CCM;

Say your system came with a License like this for CME (Note the CME at the end of the part#);

Cisco Unified Communications Manager Express

12-mailbox package: SCUE-LIC-12CME=

What you will need is a License like this for CCM (Note the CCM at the end of the part#);

12-mailbox package: SCUE-LIC-12CCM=

You can download this license file here;

http://www.cisco.com/cgi-bin/tablebuild.pl/cue-netmodule

From this good doc;

Upgrading or Downgrading the Cisco Unity Express License in the Same Version

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/installation/guide_/upglic32.html

Here is the new config guide;

CallManager for Cisco Unity Express Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml

Hope this helps!

Rob

New Member

Re: Unity configuration

Hi rob,

thanks for the URLs.We will do it & get back to you in case of issues.

regds,

aman

189
Views
6
Helpful
2
Replies