Ok I have a Unity Server(in its own domain) and callmanager at 1 site with a t1 connection to the main site where exchange 5.5 is located on a nt4 domain. HTere is no ip telephony at the main site. The customer wants to go to Unified Messaging. My questions are
What is the best way to do this. Can I reinstall Unity and make it a member server of the nt4 domain? WIll I be able to install sql on a member server?. Or should I leave it in its own domain. If I do that how do I get Unified messaging to work. There exchange server is at the main site.
You should reinstall Unity as a member server in the NT 4 domain. You should not install Exchange on the Unity server. You should also place the Unity server on the same side of the T1 link as the Exchange server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...