Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unity Voice Mail option 44 to call the subscriber

We are on Unity 4.0. Is the option 44 "call the subscriber" after you retreive a message available on this version??

4 REPLIES
Hall of Fame Super Red

Re: Unity Voice Mail option 44 to call the subscriber

Hi Mary,

This option is available on 4.0 (4.0.5 at least) Have a look;

Class of Service Messages Settings

Class of service messages settings specify the maximum length of messages, whether subscribers can send messages to public distribution lists, how deleted messages are handled, and whether subscribers can use the live reply feature.

When live reply is enabled, subscribers listening to messages by phone can reply to a subscriber message by pressing 4-4 to have Cisco Unity call the subscriber. (Subscribers who use Optional Conversation 1 press 8-8 for live reply.) For single-server installations, Cisco Unity dials the extension of the subscriber who left the message only when the Transfer Incoming Calls to Subscriber's Phone setting for the subscriber who left the message is set to ring an extension or another number. (The Transfer Incoming Calls to Subscriber's Phone field is on the Subscribers > Subscribers > Call Transfer page in the Cisco Unity Administrator.) In addition, the call transfer settings for the subscriber who left the message dictate what Cisco Unity does when the subscriber phone is busy, and whether Cisco Unity screens the call.

Subscribers Can Reply to Messages from Other Subscribers by Calling Them Check this check box to allow subscribers to use the live reply feature. When this check box is checked, subscribers can press 4-4 after listening to a subscriber message, and Cisco Unity will call the subscriber who left the message. (Subscribers who use Optional Conversation 1 can press 8-8 to use live reply.)

When this check box is unchecked, live reply is disabled in the subscriber phone conversation.

Subscribers > Class of Service > Messages Page

From this Unity 4.0.5 doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_administration_guide_chapter09186a0080449c55.html#wp1053736

Hope this helps!

Rob

New Member

Re: Unity Voice Mail option 44 to call the subscriber

Rob, that worked perfectly!!

New Member

Re: Unity Voice Mail option 44 to call the subscriber

Rob, Where can I indicate that your reply fixed the problem??

Hall of Fame Super Red

Re: Unity Voice Mail option 44 to call the subscriber

Hi Mary,

I am glad that this worked for you and thanks as well for the nice rating :) If you want to add anything you can do the following:

How do I rate a post?

Click on the "Rate this Post" link. You must be logged in to rate a post.

Please do not feel obligated. It is just nice to get such a kind reply!

Take care,

Rob

132
Views
5
Helpful
4
Replies