Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity w 2 call managers

We currently have Unity 2.4.6.120 running fine with CM version 3.0.11. Currently we are bringing up another CM v 3.1.2c at another site as a publisher. Is it possible to home this CM in on the existing Unity server and "share" it between 2 CM publishers?<br><br>

3 REPLIES
Gold

Re: Unity w 2 call managers

This is supported but you need CallManager 3.1 or later and Unity 3.0 or later. You can get the all the details in this white paper:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/whitpapr/wpcluste.htm

Keith

Keith Chambers
Unity Technical Lead
Unified Voice Team, San Jose
Cisco Systems

Anonymous
N/A

Re: Unity w 2 call managers

Somewhat of the same subject, but a little different...
I currently have a Unity 2.4.6.135 server integrated with a CCM 3.1(2C).
I built a Unity 3.1(2) server and have not integrated it with anything yet. Can I integrate this Unity server with the same 3.1(2C) CCM?

Do you have any documentation that will help me with this?

Thanks,
Brad

Gold

Re: Unity w 2 call managers

No document. Check out this post:
http://avforums.isomedia.com/cgi-bin/showthreaded.pl?Cat=&Board=unityent&Number=8274&page=&view=&sb=&vc=1#Post8274

Keith

Keith Chambers
Unity Technical Lead
Unified Voice Team, San Jose
Cisco Systems

87
Views
0
Helpful
3
Replies
CreatePlease login to create content