Does anyone know the proper Unity verstion to use in an environment that has existing Exchange 2000 and they have a Call Manager 3.0(8)?<br>Can you use Unity 2.4.5 and echange 5.5 for Unity and still have integration and Unified Messeging for the exchange 2000 users?<br><br>
You must use Unity 3.0 in an Exchange 2000 environment. Unity 2.4.x is not supported in an E2K setting (even if Unity is running E5.5) because the AD connector tends to mutate the Unity folder & call handlers.
You would need to upgrade Call Manager to 3.1 in order to integrate with Unity 3.0.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...