Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity3.1 exchange 5.5 config wizard

I'm trying to install Unity 3.1 on win2k server (no AD), the exchange version is 5.5. During the configuration wizard section when your asked to 'Choose the Exchange server in which to create new mailboxes' I'm getting error message ' namedprops error, HR=13fe2c'. I'm inputting the main exchange server and LDAP389 , DNS and WINS is ok.

The LDAP port is consistent across the site, i.e all exchange servers are using 389, the Unity install chose this as default. There is no AD at the customers site.

Can someone help,

thanks

Jeff

3 REPLIES
New Member

Re: Unity3.1 exchange 5.5 config wizard

Have changed LDAP port to 2015 across site, still getting same error message.

Jeff

Cisco Employee

Re: Unity3.1 exchange 5.5 config wizard

Is Exchange 5.5 off the Unity server? If so, did you make sure to install the Exchange 5.5 admin program on the Unity box? That's the only other thing that comes to mind here...

Cisco Employee

Re: Unity3.1 exchange 5.5 config wizard

Hi,

There is no port conflict here as there is no AD using 389 so you can let exchange use the same ports.

This issue is solved by applying a hotfix over Unity 3.1.2

symptom:

During Configuration Setup, after entering server name and LDAP port

the following error is encountered: "NamedProps error, hr=140064". Setup will

not continue beyond this point.

Condition:

This is occurring for installations of Cisco Unity 3.1(1) and 3.1(2) on a

Windows 2000 member server in an NT 4.0 domain (Exchange 5.5 on box).

Workaround:

fixed in Cisco Unity 3.1(2b) and higher.

I will update your TAC case.

112
Views
0
Helpful
3
Replies
CreatePlease login to create content