Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade 6.1 to 7.1 on new servers

Hi, i cannot find information on how to make an upgrade from callmanager 6.1 using old servers to callmanager 7.1 with new 7835 servers.

Do anyone knows what is the process or can guide me with the link where lies the procedure. I wonder how do i upload the 6.1 configuration on the new 7.1 servers.

Thank you all for your time.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Upgrade 6.1 to 7.1 on new servers

Read this link for the procedure

Migrating from Cisco Unity 4.x or Later to Cisco Unity Connection 7.x

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug022.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
6 REPLIES
Cisco Employee

Re: Upgrade 6.1 to 7.1 on new servers

There are only 2 ways to do this, and they're the same in any version

A) upgrade original system, take backup and restore on fresh install on new server

B) take backup from original system, install same version on new server, restore, then upgrade

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Upgrade 6.1 to 7.1 on new servers

Hi java, also can you help me on how to make the upgrade from unity 4.x to unity connection 7.1 also on a new server.

Or maybe could you help me with the link where i can find this procedure?

Thanks a lot for your time.

Cisco Employee

Re: Upgrade 6.1 to 7.1 on new servers

Read this link for the procedure

Migrating from Cisco Unity 4.x or Later to Cisco Unity Connection 7.x

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug022.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Upgrade 6.1 to 7.1 on new servers

If we choose option A: upgrade original system, take backup and restore on fresh install on new server

License file must be added before or after the backup on the new server?

Cisco Employee

Re: Upgrade 6.1 to 7.1 on new servers

You don't need to backup the new server, you need to restore on the new server.

You need to install the license after the restore is done.

Make sure you reach licensing@cisco.com for the rehosting

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Upgrade 6.1 to 7.1 on new servers

I have CUCM 7.1(3b)SU2 [7.1.3.32900-4]. It was upgrade from 7.1(3b) [7.1.3.30000-1] during installation. The subscriber has been added successfully but when I run Unified CM Cluster Overview Report it shows me a Unified CM Component Version mismatch for more than one component. In fact the mismatched component is not installed at all on the subscriber. This will affect the call process if I forced to IP phones to register on the subscriber.

Attached is the XML file for that report.

323
Views
15
Helpful
6
Replies