Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade from CM 4.1 to UCM 6.1

We recently upgraded from CM 4.1 to UCM 6.1. We had no set limit for ring types in 4.1 for individual lines. But after the upgrade, there is a limit of 7 ring types under each individual line. How can we put it back to where it was in the previous version? Is it even possible in 6.1?

2 REPLIES
Blue

Re: Upgrade from CM 4.1 to UCM 6.1

Ring tones is one type of end user setting that does not get migrated during the upgrade.

In order to get all your ring tones available, you must upload them to your tftp server using the following:

(as described in the following link)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611-pdf.pdf

(page 3, bullet 13)

1) login to cisco UCOSA (unified communications operating system administration)

2) choose 'SoftwareUpgrades > Upload TFTP Server file', menu option.

Please see the following link for more info on TFTP file uploads to CCM 6.1:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch7.html#wp1017196

New Member

Re: Upgrade from CM 4.1 to UCM 6.1

That worked. Thanks for the help!

115
Views
0
Helpful
2
Replies