Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Upgrading 2.4.6 to 4.0.3

Upgrading Unity 2.4.6 to 4.0.3. Since I am using the dbexport that doesn't work with 4.0.3, I downloaded from Unity Archives 4.0.1 Disk 1, which is the only 4.0.1 disk they had on CCO. When I perform the install, it tells me to insert Disk 2. There was no disk 2 on the archives page.

1 REPLY
Cisco Employee

Re: Upgrading 2.4.6 to 4.0.3

You can get the full 4.0(2) install CDs off the archive section in the Unity downloads - this should do what you need. The link to the archives location is here:

http://www.cisco.com/cgi-bin/tablebuild.pl/unity-archives

96
Views
0
Helpful
1
Replies
CreatePlease to create content