After upgrading CUCM from 220.127.116.110-37 to 18.104.22.1680-4 and selecting the option to reboot into the upgraded version of CUCM, when the Server starts up I get the following error message on the console screen and the system hangs.
FS: Cannot open root device âLABEL=/partBâ or 00:00
Please append a correct âboot=â boot option
Kernel panic: VFS: Unable to mount root FS on 00:00
I have to use the recovery disk to switch the boot partitions to get the system up and running again with the old version 22.214.171.1240-37
I know it is an OS problem (kernel panic), but there are not any cisco documents available, which will help in trouble shooting.
Any idea how to fix this and get the system to boot from the upgraded version?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...