Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading from 3.1.5 to 4.0.2 on different box

Can someone point me to the document that explains how to move users from one box (3.1.5) to another (4.0.2)? It appears that I cannot use export/import and its my understanding that I cannot go from 3.1.5 to 4.0.2 with dirt. Thank you!

  • Other Collaboration Voice and Video Subjects
Cisco Employee

Re: Upgrading from 3.1.5 to 4.0.2 on different box

there is no document for this since there's no support for this at the moment. If you want to move all users from one box to another, the way to do it is with DiRT by either upgrading the version you're moving from to the version you're moving to or vice versa.

In this case I'd normally I reccomend folks do a DiRT backup of your 3.1(5), restore it onto a new 3.1(5) install which you then upgrade to 4.0(2).

If you were looking to move just particular users between the system (i.e. for load ballancing) then you can't do this. For 4.0(1) and later systems you'll be able to use the Global Subscriber Manager tool to move subscribers around between servers in the same dialing domain but there will be no support for 3.x to 4.x moves.