Ok here is the problem. I am running Call Manager 3.0.6 I need to move forward on this fast and do some big upgrades. I would like to bring myself as currect as I can. I am sure alot of you have done this, I am looking for those that have did it to maybe give me pointers along the way as I try and place a project plan together.
What are the Risks?
What is the easy path to take?
Since I am running Unity 2.4 what errors will I have?
Risk - A subjective matter, but I would consider staying on 3.0(6) more of a risk than upgrading!
Path - At the very minimum you need to upgrade to 3.0(12) first, then move on from there. If you want to go all the way to 3.3 you need to progress first to 3.1(4)a minimum. If you want to upgrade to 3.3, you will need to order the CDs as this version is not downloadable.
Check the compatibility matrix which has all this information:
i agree, its is definitely worth upgrading. The BEST piece of advice i can give anyone doing an upgrade is to preserve a hard drive before upgrading so you can revert to it if necessary. Check out the linke below.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...