Use Call Manager to play media over a paging system.
We have a Bogen overhead paging system and would like to play some music from the Cisco system. It would be for playing Brahms Lullaby when a baby is born. We currently use the phone system to access the paging via a LS port on the back of our 2821 router. We use a PCM2000 w/zones for paging. Have you all ever had to setup anything like this?
Re: Use Call Manager to play media over a paging system.
One option would be to setup an on hold source with a .wav file of Brahm's Lullaby. You could then assign this MOH to a DN, call the paging system from the DN and press Hold. You could also set this up using an IPCC auto attendant script.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.