Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using C Sim Call Simulator

Has anyone used C SIM Hidden Exec command to test calls from 3845 v12.4 ?


Re: Using C Sim Call Simulator

Yes, it works great, here is a test:

Are you having any trouble?

AVVID4#sh ver

Cisco IOS Software, 3800 Software (C3845-IPVOICE_IVS-M), Version 12.4(7), RELEASE SOFTWARE (fc6)

Technical Support:

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 01-Mar-06 07:03 by alnguyen

ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

AVVID4 uptime is 1 day, 21 hours, 56 minutes

System returned to ROM by reload at 17:45:22 CST Mon Sep 25 2006

System restarted at 17:46:16 CST Mon Sep 25 2006

System image file is "flash:c3845-ipvoice_ivs-mz.124-7.bin"

Cisco 3845 (revision 1.0) with 481280K/43008K bytes of memory.

Processor board ID FTX0930A0D4

16 FastEthernet interfaces

2 Gigabit Ethernet interfaces

2 Channelized E1/PRI ports

6 Voice FXO interfaces

6 Voice FXS interfaces

DRAM configuration is 64 bits wide with parity enabled.

479K bytes of NVRAM.

125184K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

AVVID4#csim start 917007002