Cisco Support Community
Community Member

Valcom V-2904 Answering System Problem

Cisco 2800 series router with 7940 series phones.

Trying to connect a Valcom V-2904 system into existing VOIP network. Configed dial-peer voice pots able to connect to all door answering systems without any problems (Phones to doors).

My problem is when someone presses the remote push button none of the phones are ringing.

When I bypass the Cisco & connect the Valcom directly to an analog phone it works.

I beleive I'm having a voice-port config. issue.

If someone could copy a working config for this problem I would be greatful.


Re: Valcom V-2904 Answering System Problem

In your voice port config do you have connection plar opx XXXX?

You also need VOIP dial peers to send the call to the Call Manager.

Community Member

Re: Valcom V-2904 Answering System Problem

Yes, my config looks like this

voice-port 0/2/3

translation-profile outgoing SRST

ring number 2

no vad

no comfort-noise

timing hookflash-out 500

timing inter-digit 50

connection plar opx 6212

station-id name line 12

station-id number 6212

caller-id enable

dial-peer voice 40 pots

destination-pattern 2

port 0/2/3

ephone-dn 81

number 6212

label Line 12

description Line 12

name Line 12

preference 1 secondary 1

hold-alert 30 shared

CreatePlease to create content